The date of payment from buyers deliver within days
Company ProfileShenzhen Ze'anfu Hardware Electronic Technology Co.,Ltd
By certification [File Integrity]
A high-speed machining center for mold processing, a common structural feature is the use of a gantry frame structure to enhance the rigidity of the machine tool and to make full use of the space in the processing area. The material of the machine bed is mostly made of polymer concrete. Because of its good damping performance and low thermal conductivity, it is beneficial to improve the machining accuracy of the mold.
From the continuous innovation process of high-speed machining centers, it can be seen that making full use of the latest achievements in the field of technology, especially the latest achievements in the use of drive technology and control technology, is the key to continuously improve the high-speed performance, dynamic characteristics and machining accuracy of the machining center. .
Operational requirements / notes:
1. The continuous improvement of the working performance of the high-speed machining center is an important prerequisite for the mold manufacturing industry to process the mold efficiently and with high precision. Driven by the drive technology, many different types of high-speed machining centers with structural innovation and excellent performance have emerged. Do not place obstacles around the high-speed machining center to ensure that the work space should be large enough; do not splash water or oil on the ground to ensure that the work floor is clean and dry; do not move or damage the warning signs installed on the machine tool to ensure that the safety warning signs are clear Eye-catching.
2, do not touch the switch with wet hands, otherwise it will cause electric shock; before pressing the switch blind, you must ensure that it is correct, so as to avoid the danger caused by wrong connection; familiar with the position of the emergency stop button, to ensure that when you need to use it, you don't have to look for it. Will press it.
3.Those who have not been safely trained can not operate the Taiwan High Speed Machining Center, and generally do not allow two people to operate the Taiwan High Speed Machining Center at the same time. If a job requires two or more people to complete together, A coordinated signal should be specified in one step. 'After the specified signal has been given, do not proceed to the next step. Do not change system parameter values or other electrical settings. If the Taiwan High Speed Machining Center has to be changed, the original value should be recorded before the change so that it can be restored to the original adjustment value if necessary.